Diagonal 7.857 mm (Type 1/2.3) 12.3 Mega-Pixel CMOS Image Sensor with Square Pixel for Color Cameras

The IMX577-AACK is a diagonal 7.857 mm (Type 1/2.3) 12.3 Mega-pixel CMOS active pixel type stacked image sensor with a square pixel array. It adopts Sony’s Stacked CMOS Image Sensor technology to achieve high speed image capturing by column parallel A/D converter circuits and high sensitivity and low noise image (comparing with conventional CMOS image sensor) through the backside illuminated imaging pixel structure. R, G, and B pigment primary color mosaic filter is employed. It equips an electronic shutter with variable integration time. It operates with three power supply voltages: analog 2.8 V, digital 1.05 V and 1.8 V for input/output interface and achieves low power consumption. In addition, this product is designed for use in consumer use camcorder. When using this for another application, Sony Semiconductor Solutions Corporation does not guarantee the quality and reliability of product. Therefore, don’t use this for applications other than consumer use camcorder. In addition, individual specification change cannot be supported because this is a standard product. Consult your Sony Semiconductor Solutions Corporation sales representative if you have any questions.

◆Back-illuminated and stacked CMOS image sensor
◆Digital Overlap High Dynamic Range (DOL-HDR) mode with raw data output.
◆High signal to noise ratio (SNR).
◆Full resolution @60 frame/s (Normal), 4K2K @60 frame/s (Normal), 1080p @240 frame/s
Full resolution @40 frame/s (12 bit Normal), Full resolution @30 frame/s (DOL-HDR, 2 frame)
◆Output video format of RAW12/10/8, COMP8.
◆Power Save Mode with MIPI ULPS operation
◆Pixel binning readout and V sub-sampling function.
◆Independent flipping and mirroring.
◆Input clock frequency 6 to 27 MHz
◆CSI-2 serial data output (MIPI 2lane/4lane, Max. 2.1 Gbps/lane, D-PHY spec. ver. 1.2 compliant)
◆2-wire serial communication.
◆Two PLLs for independent clock generation for pixel control and data output interface.
◆Defect Pixel Correction (DPC)
◆Ambient Light Sensor (ALS)
◆Fast mode transition. (on the fly)
◆Dual sensor synchronization operation (Multi camera compatible)
◆7 k bit of OTP ROM for users.
◆Built-in temperature sensor
◆10-bit/12-bit A/D conversion on chip
◆Horizontal Low Power Analog Cropping
◆Window Scanning mode
◆92-pin high-precision ceramic package

Device Structure
◆CMOS image sensor
◆Image size Diagonal 7.857 mm (Type 1/2.3)
◆Total number of pixels 4072 (H) × 3176 (V) approx. 12.93 M pixels
◆Number of effective pixels 4072 (H) × 3064 (V) approx. 12.47 M pixels
◆Number of active pixels 4056 (H) × 3040 (V) approx. 12.33 M pixels
◆Chip size 7.564 mm (H) × 5.476 mm (V)
◆Unit cell size 1.55 µm (H) × 1.55 µm (V)
◆Package 92 pin LGA

Image Sensor Characteristics
(Tj = 60 °C)
Item Value Remarks
Sensitivity (F2.8) Min. 250 LSB 1/120 s integration
Saturation signal Min. 1023 LSB

Basic Drive Mode
Drive mode Number of active pixels Maximum frame rate
[frame/s] Output interface ADC [bit]
Full (4:3)
4056 (H) × 3040 (V)
approx. 12.33 M pixels
60 CSI-2 10
43 CSI-2 12
Full (4:3)
4056 (H) × 3040 (V)
approx. 12.33 M pixels
DOL 2 frame : 30
DOL 3 frame : 15 CSI-2 10
Full (16:9) 4K2K
4056 (H) × 2288 (V)
approx. 9.28 M pixels 79 CSI-2 10
Full (16:9) 4K2K
4056 (H) × 2288 (V)
approx. 9.28 M pixels
DOL 2 frame : 39
DOL 3 frame : 19 CSI-2 10
Full (4:3) Binning
2028 (H) × 1520 (V)
approx. 3.08 M pixels 178 CSI-2 10
Full (16:9) Binning
1080P (Normal)
2028 (H) × 1112 (V)
approx. 2.26 M pixels 241 CSI-2 10
Full (16:9) Binning
720P (Normal)
1352 (H) × 740 (V)
approx. 1.00 M pixels 241 CSI-2 10
Full (16:9) Scaling
1080P (Normal)
2028 (H) × 1144 (V)
approx. 2.32 M pixels 79 CSI-2 10
Full (16:9) Scaling
720P (Normal)
1352 (H) × 762 (V)
approx. 1.03 M pixels 79 CSI-2 10

Source: https://www.sony-semicon.com/files/62/pdf/p-13_IMX577-AACK_Flyer.pdf

Leave a Reply

Your email address will not be published. Required fields are marked *